パラメータ仕様

ワークパレットの幅(mm)160、240、320、400、480、560、640(カスタマイズ対応)
ワークパレットの長さ(mm)160、240、320、400、480、560、640(カスタマイズ対応)
コンベヤーの長さ(mm)L=Lwt+150
許容最大積載量(kg)30
Permitted maximum of each step(kg)10
Step distance200,250
Height range350 ≤ Height of top and bottom conveyors < 1600
リフト速度(mm/s)500以下
コンベヤーの定格速度(m/min)0,6,9,12,15,18(V=0はモーターなしを意味する)
リフトモーターの種類サーボモーター(パルス式サーボドライブを含む)
コンベヤモーターの種類ステッピングモーター(I/O型ステッピングモーター駆動装置を含む)
モーターの取り付け位置ML(中央左)、MR(中央右)
サーボモーターの動作電圧AC:220V(単相)
ステッピングモーターの動作電圧DC:48V 3.8A(その他の動作電圧へのカスタマイズにも対応)
動作周波数50Hz
Feeding mechanism - Execution cylinder bore diameter(mm)25
Feeding mechanism - Rotate cylinder bore diameter(mm)50
Feeding mechanism - Push force(N)120
Feeding mechanism - Working air pressure of cylinder0.4~0.8 MPa

詳細

LP/X Pallet conveyor continue lifter
主なメリット:
  • Short cycle time: 1.5-2.5 seconds
  • 持ち上げ時の衝撃が少ない
  • 動作時の騒音が少ない
  • 清潔で手入れが簡単
  • 迅速な設置を可能にするモジュール式設計
  • コンパクトなサイズで省スペース
Optimizing Cycle Time for High-Speed Pallet Conveyor Systems

The Short Cycle Time Pallet Lifter signifies a paradigm shift in the world of パレットコンベヤ systems. By ingeniously incorporating multiple roller holders, it not only escapes the limitations of traditional lifters but also elevates operational efficiency to new heights. In a landscape where time is of the essence, this lifter sets a new standard for speed, versatility, and uncompromising performance.