Thiết bị nâng từng bước LP/X
Thông số kỹ thuật
| Chiều rộng pallet phôi (mm) | 160, 240, 320, 400, 480, 560, 640 (Hỗ trợ tùy chỉnh) |
|---|---|
| Chiều dài pallet phôi (mm) | 160, 240, 320, 400, 480, 560, 640 (Hỗ trợ tùy chỉnh) |
| Chiều dài băng tải (mm) | L = Lwt + 150 |
| Tải trọng tối đa cho phép (kg) | 30 |
| Permitted maximum of each step(kg) | 10 |
| Step distance | 200,250 |
| Height range | 350 ≤ Height of top and bottom conveyors < 1600 |
| Tốc độ thang máy (mm/s) | ≤500 |
| Rated speed of conveyor(m/min) | 0,6,9,12,15,18(V=0 means no motor) |
| Lift motor type | Servo motor(Including pulse type servo drive) |
| Conveyor motor type | Stepper motor(Including I/O type stepper drive) |
| Vị trí lắp đặt động cơ | ML (giữa bên trái), MR (giữa bên phải) |
| Working voltage of servo motor | Điện áp xoay chiều: 220 V (một pha) |
| Working voltage of stepper motor | DC: 48V 3.8A(Support customizing other working voltage) |
| Tần số làm việc | 50 Hz |
| Feeding mechanism - Execution cylinder bore diameter(mm) | 25 |
| Feeding mechanism - Rotate cylinder bore diameter(mm) | 50 |
| Feeding mechanism - Push force(N) | 120 |
| Feeding mechanism - Working air pressure of cylinder | 0,4–0,8 MPa |
Chi tiết
LP/X Pallet conveyor continue lifter
- Note 1: Above specifications are for single workpiece pallet lifter.
- Note 2: The stroke of stepping lifter must be an integer multiple of 200mm or 250mm.
- Note 3: Default workpiece pallet height Hwt is 100mm. When step distance is 200mm, workpiece pallet height Hwt cannot be over 100mm.
- Note 4: To load or unload workpiece on lifter, please specify.
- Note 5: To add a photoelectric safety protection device, please specify
- Note: To use the lifter. The minimum conveyor height is 350mm. And the maximum conveyor height is 1600mm. N stand for the quantity of steps. S stand for step distance. And NxS is the stroke of lifter.
Những lợi ích chính:
- Short cycle time: 1.5-2.5 seconds
- Low impact during lifting
- Tiếng ồn thấp trong quá trình vận hành
- Clean and Easy maintaining
- Thiết kế mô-đun giúp lắp đặt nhanh chóng
- kích thước nhỏ gọn giúp tiết kiệm không gian
Optimizing Cycle Time for High-Speed Pallet Conveyor Systems
The Short Cycle Time Pallet Lifter signifies a paradigm shift in the world of băng tải pallet systems. By ingeniously incorporating multiple roller holders, it not only escapes the limitations of traditional lifters but also elevates operational efficiency to new heights. In a landscape where time is of the essence, this lifter sets a new standard for speed, versatility, and uncompromising performance.
